inkAID Adhesive Primer is a clear, water based, acrylic primer designed to provide a strong adhesive coating layer between smooth, non-porous surfaces and the other inkAID coatings. Some surfaces, such as film, glass, or polycarbonate can be difficult for water based coatings to adhere to. The Adhesive Primer will adhere tightly to these surfaces as well as provide a strong bond to the subsequent layer of one of the other inkAID coatings. Many smooth, non-porous surfaces can be coated with most of the inkAID coatings without applying the Adhesive Primer. But when required, the Adhesive Primer will provide a lasting bond between the underlying surface and the inkAID ink jet receptive coating.
Directions: Applying inkAID Adhesive Primer
Check Adhesive Primer MSDS for safety instructions in handling this product. Wear protective gloves.
Stir inkAID AdhesivePrimer gently before applying.
Foam brushes are the preferred applicator, as they provide a smoother coating than bristle brushes. Brush onto the surface in light, even strokes. Only a very light coating of Adhesive Primer is needed, making sure that the surface is covered evenly.
Allow the Adhesive Primer to dry completely before any other coating is applied.